MEP Course in Dubai

MEP course (Mechanical, Electrical, Plumping) refers to the aspects of building information design and construction. Spoton Institute’s MEP design course is specially designed for planning, preparing documentation, cost estimation, operations, and maintenance.

What is HVAC DESIGN Course?

An HVAC design engineer designs and installs heating, venting, and air-conditioning systems. This career is a mechanical engineering     specialty and responsibilities include engineering heating, venting, or air conditioning systems that fulfill a client’s needs.

Why to choose HVAC Design Course?

A well-designed HVAC system can conserve energy, improve air quality, achieve adequate balance, and improve the overall efficiency and performance of the system. When you invest in a quality HVAC system design, you invest in the wellbeing of all who enter your building

Who should take HVAC Design Course?

HVAC Design Training provides intensive and practical training ideal for technical or engineering graduates, facility managers, sales representatives, and others who want to gain a better understanding of HVAC fundamentals and system.

Course Outline :

Components of Course :

HVAC systems are divided into four categories which come in different sizes and specifications that fit into your home or business.

  • Heating and cooling split systems. 
  • Hybrid split system.
  • Duct free (Mini-split) 
  • Packaged heating and air conditioning system.
Course Contents :

MODULE -1 BASICS OF HVAC SYSTEM

  • Scope of HVAC Industry with overview of Consulting &   Construction Industry
  •  Concepts of Air conditioning system
  •  Principles of Air Conditioning systems
  •  Refrigerant cycle
  •  Split Air Conditioning
  •  VRV – Air Conditioning
  •  VRV PROJECT DESIGN, ESTIMATION, BOQ
  •  Central Air Conditioning system

MODULE -2 Psychometric  

  • Psychometric chart 
  • properties of air

MODULE -3 Heat Load Estimation

  •  Basics of Heat transfer in a building envelop 
  •  Understanding of Outdoor & Indoor conditions 
  •  Heat Gain through Glass 
  •  Heat Gain through Wall 
  •  Heat Gain through Partition 
  •  Heat Gain through Roof/Ceiling 
  •  Heat Gain through Infiltration 
  •  Heat Gain through Ventilation
  •  Heat Gain through People 
  •  Heat Gain through Kitchen Appliances / Electrical

MODULE -4 Design of Air Distribution System 

  •  Components of Air distribution system 
  •  Dampers 
  •  Types of Diffusers
  •  Grills 
  •  Duct size calculation manual & using software
  •  Heat Load Calculation Manual & E20 calculation excel software 
  •  HAP Software (software shall be provided to students) 
  •  U –Value selection
  •  Sample HAP calculations

MODULE -5 Duct Design

  •  Types of Ducts, Ducts Fittings
  •  Duct designing – Equal friction method and Equal Velocity Method. 
  •  Duct Aspect ratio and duct sizing 
  •  Duct Materials selection and gauges selection 
  •  McQueen duct size software
  •  Sample duct designing

MODULE -6 Design of Water Distribution System

  •  Chilled Water system pipe designing 
  •  Chilled water and Hot water GPM calculation 
  •  District cooling system 
  •  Friction loss calculation for the piping system 
  •  Friction loss in straight pipes
  •  Friction loss in Fittings 
  •  Valves used in chilled water system
  •  Calculating TDH for pump (open piping system and closed piping system)
Learning Outcomes :

HVAC is an important part of residential structures such as single family homes, apartment buildings, hotels, and senior living facilities; medium to large industrial and office buildings such as skyscrapers and hospitals; vehicles such as cars, trains, airplanes, ships and submarines; and in marine environments, where safe and healthy building conditions are regulated with respect to temperature and humidity, using fresh air from outdoors.

Benefits of HVAC course in Dubai : 
  • HVAC Course in Dubai by our trained experts.
  • You will get Institutional certificate with KHDA approved.
  • Spot-on provides you the facility to schedule the classes according to your availability
What is ELECTRICAL DESIGN & DRAFTING Course?

Electrical designing & Drafting training: It entails planning, creating, testing, or supervising the development and installation of electrical equipment, including lighting equipment, power systems, power distribution, fire and life safety systems, electronic components, and voice and data communications.

Why to choose Electrical Design & drafting Course ?

The Electrical Designing and Drafting course for Engineers would open the way for a brighter future, complete with a rewarding job and a good salary. The best institute will provide you with experienced faculty members who will assist you in understanding and learning.

Who should take Electrical Design & drafting Course?

Electrical engineers tend to be predominantly investigative   individuals, which mean that they are quite inquisitive and curious people that often like to spend time alone with their thoughts.

Course Outline :

Components of Course :

MODULE -1 Electricity Introduction and Basics 

  •  Basics Concept of Electrical Engineering 
  •  Ohm’s Law, Voltage, Current, Resistance, Power and Loads in series and parallel 
  •  AC and DC currents 
  • How is AC Current generated, Transmitted, Distributed and Consumed 
  •  DC and AC Generator, Transformers, Single and 3 phase Induction Motor
  •  Star Delta Connections

MODULE -2 Field Instruments Used in Industry 

  •  Switchgear: Various switchgear (Spst, Spdt, Contactors, Selector Switch) and Push Buttons
  •  Relays, Timers and Counters
  •  Protection Devices: RCCB, MCB, FUSE, ELCB, Overload Relay, Sockets
  •  Solenoid Valves, Control Valves, Level Sensors, Flow Sensors, Rtd, Proximity Switch, IR Sensor, Motion, Metal and Non Metal, Float Sensor, Pressure Sensors, Encoder, Capacitive Sensor, Limit Switch, Potentiometer, Buzzer, Pump, Smoke Sensor 

MODULE -3 Electrical Control Circuits 

  •  Single phase and 3 phase systems.
  •  Different Types of Control Circuits and Power Circuits for Motors
  •  Connection of Loads (Series and Parallel)
  •  Inching/Jogging
  •  Relay Logic Wiring Techniques.
  •  DOL Starter with Power Contactor and Control Contactor
  •  Forward and Reverse Operation of an Induction Motor 
  •  Star – Delta Starter (Manual and Automatic)

MODULE – 4 Symbols and Abbreviations

  • Electrical Symbols 
  •  Abbreviations 
  •  Load details of various electrical equipment
  • saving electrical energy

MODULE – 5 Illuminations Design & AC System

  •  Basics – Luminance
  • lax level recommended standard
  • Types of lighting 
  •  mounting of lighting fixtures
  •  Illumination Calculations based on lax level in the particular area and selection of different types of lights

MODULE – 6 LOAD CALCULATION

  •  Lighting load calculation 
  •  Raw Power Load Calculation
  •  AC Load Calculation 
  •  Peak Demand Calculation

MODULE – 7 TRANSFORMERS 

  • Parts of a transformers 
  •  Cooling methods 
  •  Types of transformers 
  •  Losses in a transformer 
  •  Transformer protection 
  •  Transformer sizing
  • Earthling of transformer

MODULE – 8 DIESEL GENERATOR

  • Advantages of a DG set
  • Types for DG sets
  •  Installation                                   
  •  Protection
  •  Faults 
  •  Sizing

MODULE – 9 UN INTERRUPTED POWER SUPPLY (UPS)

  • Introduction
  •  Working
  •  Battery sizes
  •  UPS sizing 
  •  Battery sizing

MODULE – 10 Switch Gear Selections (Fuse, Circuit Breakers & Relay) 

  • Types of Circuit Breakers 
  •  Working Principle of Circuit Breaker
  •  Standard Sizes of Circuit Breakers 
  •  Circuit Breaker Selection based on short circuit capacity 
  •  Circuit breaker sizing

 MODULE – 11 CABLE SIZING AND BUSBAR CALCULATION

  • Types of Cables 
  •  Selection of cable
  •  Voltage drop calculations
  •  Short circuit calculations 
  •  BUS BAR calculations 
  •  BUS Duct
  • Conduits & Cable trays

MODULE – 12 EARTHIG AND LIGHTING ARRESTORS 

  • Importance of Earthling, Points to Be Earthed
  • Earthling calculations 
  •  Calculation for lightening arrestors

MODULE – 13 POWER FACTOR CORRECTION 

  •  Introduction to Capacitor Banks 
  •  Advantages of improved power factor
  •  Capacitor Bank Sizing

MODULE – 14 ELECTRICAL DRAFTING AUTOCAD

  •  SLD
  • Load Scheduling
  •  Lighting Layout 
  •  Conduit Layout
  •  Wiring Layout
  •  Power Layout

MODULE – 15 EXTERNAL DESIGNING

  •  Designing of Villas & Apartments 
  •  Designing of High Rise Building
  •  Designing of Malls

MODULE – 16 SOFTWARES

  • AUTOCAD
  •  DIALUX

Learning Outcomes :

Electrical Design & drafting , Which provides a systematic development of skill and knowledge of QA/QC Engineer/Inspector E 7 I in the line with international standards including Preparation of ITP’S, QCP’S and stage wise inspection of QA/QC activities etc.

Benefits of Electrical Design & drafting course in Dubai :
  • Electrical Design & drafting Course in Dubai by our trained experts.
  • You will get Institutional certificate with KHDA approved.
  • Spot-on provides you the facility to schedule the classes according to your availability

PLUMBING (WATER SUPPLY/DRAINAGE) – DESIGNING AND DRAFTING :

What is Plumbing Designing and Drafting Course?

Plumbing Designing and Drafting is a major area in building design systems where students are being taught in depth in areas related to water supply, drainage etc. A candidate pursuing the course in this design field would be able to have a very good lucrative career in this area.

Why to choose Plumbing Designing and Drafting Course?

A plumbing drawing is a type of technical drawing that provides visual representation and information relating to a plumbing system. It is used to convey the engineering design to plumbers or other workers who will use them to help install the plumbing system.

Who should take Plumbing Designing and Drafting Course?

 Plumbers are always in demand since everyone everywhere needs them. Who want to gain a better understanding convey the engineering design to plumbers other workers who will use them to help install the plumbing system. Being a good plumber guarantees career security because you cannot outsource it.

DESIGN OF PLUMBING SERVICES :

MODULE -1

➢ Introduction to standards 

  • International standards (IPC/ASHRAE/BS)
  • Local authority standards (Dubai Municipality/DEWA)

➢ Introduction to units

  • SI units and Metric units

➢ Introduction to Plumbing System 

  • Cold Water
  • Boosted Cold water 
  • Gray Water System
  • Cooled cold water 
  • Hot water systems
  • Irrigation System 

➢ Water supply in building: 

  • Direct system.
  • Pumped system. 

➢ Water Tanks – Location/Construction/Types 

  • Underground water tanks
  • Above ground water tank 
  • Overhead water tanks 

➢Water Tanks – Sizing 

  • Dews Standards 
  • British standards
  • Demand Estimation
  • Residential
  • Commercial
  • Industrial 

➢ Practice Session

MODULE -2:

➢ Common Sanitary Fixture Details

  • Standard Pipe sizes
  • Common Sanitary Fixtures Details
  • Wash basin • Water closet
  • Showers • Sinks
  • Bath tubs
  • Bidets
  • Urinals

➢ Pump Capacity & Head selection – Transfer / Booster Pumps / Sump Pumps

➢ Water pipe sizing in Buildings.

➢ Practice Session

Benefits of Plumbing Designing and Drafting course in Dubai :
  • Plumbing Design & Drafting Course in Dubai by our trained experts.
  • You will get Institutional certificate with KHDA approved.
  • Spot-on provides you the facility to schedule the classes according to your availability.

MODULE – 1 Basic Knowledge

  •  Fire Concept 
  •  NFPA Codes Representation 
  •  British Standard Codes Representation 
  •  UAE Fire code
  •  Local Codes Guidelines
  •  Manufacturers in UAE 
  •  Documents Required for Civil Defense Inspection & Apply procedure.

MODULE – 2 Fire Extinguishers

  •   Types of Fire extinguishers
  •   Selection of Fire Extinguishers,
  •   Design Method & Distance Between Extinguishers.
  •   Type of approvals on fire extinguishers
  •   Installation procedure
  •   Maintenance procedure. 
  •   Design Practice session

MODULE – 3 Sprinkler System 

  •  Sprinklers Operation procedure &Types SYED ENGINEERING & ACOUSTIC CONSULTANCY L.L.C 
  •  Pendent Type sprinkler
  •  Recessed Pendent type sprinkler
  •  Concealed type pendent type sprinkler
  •  Sidewall Type sprinkler 
  •  Pipe sizing Calculation 
  •  Type of pipes used
  •  Sprinkler flow calculation
  •  Sprinkler coverage Distance
  •  Type of approvals on fire extinguishers
  •  Installation procedure 
  •  Design Practice session.

MODULE – 4 Wet Riser & Dry Riser System – Cabinet System

  •  Cabinet Types & Selection (Surface type & Recessed Type)
  •  Landing Valve Selection
  •  Hose Reel Selection
  •  Pipe sizing Calculation
  •  Type of pipes used
  •  flow calculation
  •  coverage Distance Between Hoses
  •  Type of approvals
  •  Installation procedure
  •  Design Practice session

 MODULE – 5 Fire Pump System

  •  Types of Fire Pump Set.
  •  Electrical Pump 
  •  Diesel Pump
  •  Jockey Pump selection
  •  Suction side valve selection
  •  Discharge side valve selection 
  •  Pump Head flow calculation
  •  Pump flow Calculation
  •  Control panel selection 
  •  Pressure Gauge Operation
  •  Pressure switch Operation
  •  Flow meter Operation
  •  Test Line Sizing
  •  Delivery Head Sizing 
  •  Pump Plinth Sizing 
  •  Operation Procedure of fire pump set 
  •  Pump Room Sizing 
  •  Hydraulic calculation
  •  Pipe sizing Calculation com
  •  Type of pipes used 
  •  Type of approvals.
  •  Installation procedure.
  •  Maintenance procedure.
  •  Design Practice session.

MODULE – 6 Deluge systems  

  •  Deluge valve selection
  •  Mechanical type operation 
  •  Electrical type operation 
  •  Deluge valve Operation 
  •  Pipe sizing Calculation
  •  flow calculation
  •  Installation procedure
  •  Design Practice session.

Learning Outcomes :

Be able to identify fire safety hazards and risks in the workplace and report deficiencies. Be able to ensure the availability of fire safety resources and equipment. Know how to organize emergency evacuations and fire drills in the workplace and report on their effectiveness.

Benefits of Fire Fighting Design Training course in Dubai :
  • Plumbing Design & Drafting Course in Dubai by our trained experts.
  • You will get Institutional certificate with KHDA approved.
  • Spot-on provides you the facility to schedule the classes according to your availability.

Enquire About The Course

    Related Courses

    🔹 Python Programming


    🔹 Big Data Analytics


    🔹 Artificial Intelligence


    🔹 Machine Learning with Python


    🔹 Data Science with R Program

    🔹 Full Stack Web development using Python


    🔹 Web Development Python MySQL


    🔹 Web Development PHP+MySQL


    🔹 Mobile App Development


    🔹 SQL Server & Oracle Database


    🔹 Excel VBA


    🔹 Visual Basic


    🔹 Java


    🔹 .Net


    🔹 C & C++ Programming


    🔹 Coding for Kids

    Related Courses:

    Students Rating -
    5/5
    Students Rating -
    5/5
    Students Rating -
    5/5
    Students Rating -
    5/5

    SpotOn Students Benefits

    Placement Assistance

    Focused Training

    Placement Support

    Placement Assistance

    Lab Support

    Individual Lab Support

    hands on training

    Expert Trainers

    flexible timings

    Flexible Timings

    interview preparation

    Interview Preparation

    placement assistance

    Hands on Training

    Affordable Price

    Affordable Course Fees

    Student Testimonials

    I recently completed my Interior designing softwares and it was an amazing experience. I studied AutoCad, Revit and SketchUp here. The time schedule was really flexible. I had two tutors and one of them was Sarath sir, he was very helpful and improved me a lot in software skills and as well as other professional skills. And to specially mention, all the tutors and staffs were friendly and supportive. There are many other courses in this institute and I strongly recommend to try those here.

    ratings
    Firoz Bin Saif
    Student, Spoton Institute

    I just completed my VAT course at the Spoton training institute. I was new to Dubai and was a little scared to explore and learn new things but my trainer made it very easy, he made the course interesting and delivered it simply. If any doubt arrives in the class he will clear that doubt with some examples from his work experience so that I can understand easily. I got more knowledge from this class, so I thank spoton institute.

    ratings
    Aleena Shaji
    Student, Spoton Institute

    My experience working with Spoton has been nothing but incredible. I was always presented with opportunities to learn and grow professionally and personally with regard to my field in Cybersecurity. It is a blessing to form relationships and work with gifted and intelligent individuals who are just as passionate about what they do as I am. Spoton is definitely a great company, and I hope to do more work with them in the future.

    ratings
    Suzanne Peiris
    Student, Spoton Institute

    I had a fantastic experience with the fashion designing course at Spoton Training Institute . The curriculum covered a diverse range of topics, including fashion digital illustration, fashion draping, garment construction, and pattern making. Ayana, our trainer, was exceptional, providing thorough guidance and expertise. The classes were engaging, and the overall atmosphere was conducive to learning. I highly recommend this institute for anyone looking to pursue a comprehensive and hands-on fashion design education.

    ratings
    Shalu Singh
    Student, Spoton Institute

    I recently completed the VAT course at SpotOn, taking online classes . I’m pleased to say it was an excellent experience. Jiss Thomas’s was my trainer and his teaching was comprehensive, making complex topics easy to grasp. The online platform was user-friendly, ensuring a smooth learning process. I highly recommend SpotOn for their VAT course, especially for the convenience of online learning and the expertise of trainers like Jiss Thomas.

    ratings
    Vidhya MV
    Student, Spoton Institute
    Certification
    Career Guidance
    Trained by Experts
    Cooperate Project Training

    CANDIDATES WHO WANTS TO EXPERT IN MEP 

    Frequently Asked Questions?

    • MEP Course in Dubai helps communicate effectively
    • To face for the interviews 
    • To find a better job opportunity
    • To speak with different nationalities
    • We engage the students in more practical sessions with our certified trainers.
    • We provide Online and offline mode for MEP Course
    • We have Cambridge certified trainers with corporate level experienced for MEP  Course.
    • You will get more practical knowledge than theory.
    • You will be trained by MEP experts.
    • You will get both institutional certificate and the KHDA certificate.
    • Spoton provides you the facility to schedule the classes according to your availability.
    • You will get the study materials to study further.

    Contact Us

    Enquire the Courses Now !